Hydra-Cell positive displacement pumps feature a sealless pumping chamber and hydraulically-balanced diaphragm design, enabling the pumps to provide leak-free, low-maintenance performance while processing difficult fluids over a wide range of pressures and flows.
Hydra-Cell pumps can run dry without damage and will handle abrasives and particulates (up to 500 microns) that can destroy other pumps.
Multiple diaphragms minimize pulsations, so Hydra-Cell operates virtually pulse-free, often eliminating the need for expensive pulsation dampeners.
Hydra-Cell products are only available in Texas and Louisiana.
Hydra-Cell Products Inquiry Form
Complete the following form, so we can help you with the best solution for your application. We’re at your service.
- Hydra-Cell Vector Peristaltic Pumpby Tencarva Machinery Co. on April 17, 2018 at 6:45 pm
Hydra-Cell Vector Peristaltic Pump - most commonly used for a variety of industrial applications that include: chemical processing, food and dairy processing, paints and coatings, petrochemicals, pharmaceuticals, pulp and paper and wastewater treatment. The post Hydra-Cell Vector Peristaltic Pump appeared first on Product News & Press from the Tencarva and our Partners.
- Pump of the Day: The Hydra-Cell D35 Seriesby Tencarva Machinery Co. on February 1, 2018 at 4:06 pm
Tencarva’s Pump of the Day – 2.1.18 -The Hydra-Cell D35 Series most commonly used in high pressure requirements or when handling dirty fluids. Pump features a seal-less design and horizontal disk that check valves that enable the pump to handle abrasives and particulates that might damage or destroy other types of pumps.http://www.hydra-cell.com/product/D35-hydracell-pump.html / #coolfact able The post Pump of the Day: The Hydra-Cell D35 Series appeared first on Product News & Press from the Tencarva and our Partners.
- Hydra-Cell® Provides Longer Pump Life for Textile Humidificationby Tencarva Machinery Co. on October 9, 2015 at 5:23 pm
[ezcol_1half]A company that produces dyed spun yarns for apparel, furniture, vehicles, and industrial fabrics sprays demineralized water into spinning wool to prevent static build-up, yarn breakage, and the formation of dust and lint. Piston pumps were used in the past, without long-term success. The demineralized water, a non-lubricating liquid, attacked the pistons causing excessive wear The post Hydra-Cell® Provides Longer Pump Life for Textile Humidification appeared first on Product News & Press from the Tencarva and our Partners.